SereneLife Inverter MIG Welding Machine+Starter Kit

• 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask
• GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup
• FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes
• DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power
• ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability

Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item

Warranty: 90 Day Woot Limited Warranty

In the box: SereneLife Inverter MIG Welding Machine+Starter Kit includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask

Technical Specs: Model - SLMIGWL140.3

• Construction Material: Metal
• Power Supply: 110V/220V (13A Power Adapter)
• Maximum Input Current: 110V/43.1A, 220V/21.5A Frequency Response: 50/60Hz
• Rated Input Power: 8.1KVA Current & Voltage Adjustment Range (MIG, A/V) : (50A/16.5V-130A/20.5V) 25℃60%
• Utilization Factor Output (MIG, A/V): (130A/20.5V) 40℃100%
• Utilization Factor Output (MIG, A/V) :（100A/19V） No-load Voltage: 42V Usable Wire: 0.2''-0.3'' -inch
• Wire Feed Rate: 3-15m/min
• Power Factor: 0.73
• Efficiency: 85%
• Shell Protective Grade: IP21S
• Insulation Grade: F
• Welding Output: 60-125A,AC
• Capacity: 18 gauge (0.039") to 3/16" (0.24") mild steel only
• Duty Cycle: 20% @ 90 A
• Open Circuit Voltage: 30V 2.67KVA
• Welder Tips / Wire Size Installed tip will accept 0.031" Flux-Core wire Wire Spool Capacity: 2.2 lbs.
• Spool Recommended Circuit Breaker: 30A time-delay (slow-blow) breaker (30A for maximum performance)
• Extension Cord Recommendations: 3 conductor #12A or larger up to 5.91 ft.
• Generator Requirements: Minimum 4,000W continuous output with no low-idle function (or low-idle off)
• Product Dimension (L x W x H): 15.7'' x 6.7'' x 11.8'' -inches
• Sold as: 1
• Weight: 21.06 lbs.